POST No. 21803
Bioliod Premium Help
2010-01-16 02:19:00

Hi I have a few problems

1. Neither the Zigbee (in the remote) or the infra red remote can command the robot. I don't know how to set the matching ID

2. My distance sensor is set to port 6 but the default autonomous program keeps going circle

3. I accidently overide the original task file (and autonomous program) where can I re download thanks,

2010-01-16 02:19:00
2010-01-16 19:24:00 UncleBob
I got some vid. Can you please see if I am doing anything wrong? 1. Testing remote without touching Roboplus http://www.youtube.com/watch?v=LKy_kb5oizQ 2. Checking Roboplus Manager and Task http://www.youtube.com/watch?v=hAipazMZj1s http://www.youtube.com/watch?v=5CO-i5cbPTk
2010-01-16 19:24:00
Edit Delete
2010-01-20 13:36:00 ROBOTIS
Hello Bob, From your video, when you see the connection by using RoboPlus Manager, it is indicating the zigbee is not connected. As the zigbee module is not connected, it can not be communicated basically. Also, the wireless communication can not be done while you are connecting the PC cable into a Robot. If you would like to control it with a remote controller, you have to take off the PC cable first. ROBOTIS
2010-01-20 13:36:00
Edit Delete
웹에디터 시작 웹 에디터 끝