...

FAQ

CONTROLLER | I can’t connect my controller to the PC.

Hit 2,449

본문

1. Open Device Manager on Windows.
When the product is connected to the PC, please check whether the connected device’s (LN-101, USB2Dynamixel, controller, etc.) port is found.
 
2. If the port is found,
   Please try firmware recovery.
   -> Firmware recovery
   -> OpenCM9.04 firmware recovery (e-Manual work in progress)
 
2-1. If the port is found but recovery doesn’t work, please check,
   -> How to solve the communication problem for CM-530, LN-101, USB2Dynamixel
       If you have problems with other products, or can’t solve the problem with the instructions above, please contact us at  contactus2@robotis.com).
 
3. If the port is not found,
   -> How to solve for CM-150, CM-200
   -> How to solve for OpenCM9.04
       If you have any problems with other products, or can’t solve the problem with the instructions above,
        
please contact us at  contactus2@robotis.com).

 

Links:

 

1. e-Manual.

2. Connect to PC (CM-150, CM-200)

3. Connect to PC (OpenCM9.01) (To be updated)

4. Firmware recovery