- This motor is used with the controller in the ROBOTIS DREAM and can be controlled by controlling the port.
- By setting to rotation mode, users can make it move like the Geared Motor GM-10A.
By setting it to joint mode and setting the rotation speed (strength) and position value, users can enable it to move as well.
- Used to move joints or steering device or to maintain a certain angle.
Servo Motor SM-10 | 1 |
---|---|
5P Cable | 1 |
Weight | 16g |
---|---|
Dimension | 18mm x 36mm x 27mm (with Horn) |
Gear Ratio | 194 : 1 |
Speed | 85RPM (at 3V) |
Etc. | Safety Device : Clutch Installed |
Controller : CM-100A, CM-150, CM-200, OpenCM7.0
DREAM Kits 1~5 Levels, SMART kits 1~2 Levels